|
Our
Ladder Levelers are quick and easy to install, you will
find it's a snap. The process requires about 15 minutes and
few common tools - a pen or pencil, center punch, hammer, electric
drill with two drill bits, and a socket or box wrench. It's
as easy as 1, 2, 3...
Ladder
Leveler Installation Procedures
 Mark the Hole Centers.
Position the template provided on the center line
of the ladder rail, near the bottom of the leg.
Using a felt tip pen or pencil, mark the 3 hole centers.
|
 
|
 Drill the 3 Mounting Holes.
Center
punch the 3 marks made in Step 1.
Using
a 1/8" drill bit, drill pilot holes in all 3 positions.
Insert
a 11/32" bit in the drill and re-drill the holes.
|
|
 Bolt on the LeveLok® Unit.
Slip
the studs on the LeveLok unit through the holes
you've drilled.
Slide
washers and locknuts on the studs and tighten the
nuts with a 1/2" wrench.
|
|
 That's all there is to it! In about 15 minutes, your "ordinary"
extension ladder will be LeveLok-equipped and ready to use. No need to cut your ladder or mutilate it in any way.
The ladder leveler
will enable your ladder to adapt to terrain differentials of
up to 10 inches in 3/8" intervals - without any effect
on its duty rating. And the new, heavy-duty feet will greatly
enhance the sure-footedness of your ladder, on any terrain. Want more?
Installing our Levelers will NOT affect your Ladder Warranty.
CLOSE
UP
MAIN LEVELER
PAGE
TO
ORDER
|
|
